Corrosion comparison: Mitreh Cold scale remover solution (MDA0102) vs. hydrochloric acid
1404/08/24
What is the Langelier Index? A Complete Guide to Predicting Water Sedimentation and Corrosion
1404/08/21
Measuring Carbonate and Bicarbonate in Water: A Complete Guide to Alkalinity Control
1404/08/19
Warning signs that indicate the need for chemical cleaning of the heat exchanger
1404/08/17
Cold Mitreh
Cold mitreh vector sediment solution
Cold mitreh, a solvent solution in water with a high dissolution rate, is introduced as a strong sediment vector and an innovative product of Abrizan company.
Special features of cold mitreh
The cold mitreh was developed in response to the industry's need for an alternative solution for descalers. Discaler is a sediment vector material that is produced based on hydrochloric acid and is very dangerous, toxic and corrosive. Abrizan company, by studying the market of sediment vectors and understanding the strengths and weaknesses of the existing products, made the cold mitreh to strengthen the strengths of these products, such as the strong sedimentation of all types of sediments, and eliminate their weaknesses.
Advantages of ColdMitrehSolution
- Complete sediment removal:Unlike competitors, Cold Mitreh does not have incomplete sediment removal and dissolves and completely removes all types of sediment in water.
- No need to stop the system:ColdMitrehcan be used without stopping the system and high costs for implementation.
- High safety:ColdMitrehdoes not have the dangers of acids and is a safe method of sediment removal.
- Environmentally friendly:This product does not have the environmental problems that descalers have.
- Controlled corrosion compared to descalers:Corrosion is controlled with ColdMitreh, so your systems will have a longer lifespan.
- Very high power
- Great energy savings
- Accelerates the sediment removal process compared to industrialMitreh(6 to 36 hours)
Comparison of ColdMitrehCorrosion
ColdMitrehcorrosion (10-20mpy) is very low compared to the types of descalers available on the market which have corrosion between (70-90pmy) and this feature makes it easy to easily descaleMitrehalong with the water fluid in the Serkole facility and all parts of the facility.
How to use ColdMitrehsolution:
To remove sediments, add 2 to 3 liters of coldMitrehsolution to the system for each kilo of estimated sediment, depending on the type of sediment, and in cold water systems (3 days) after the system has been operating normally, according to the instructions of the technical offices of Abrizan Company, drain it and after completely washing the system circuit, drain it with normal water.
Product information (Cold Mitreh)
Chemical product name | General sard mitreh |
Trade name | Mitreh MDA0102 |
Application | Scale remover solution with low corrosion |
ColdMitrehHazard Identification
This product is not classified as a dangerous or harmful product under national or international regulations.
Physical / chemical hazards | None |
Environmental hazards | None |
Effect of exposure | None |
Symptoms of exposure to coldMitrehsolution
Inhalation | Mild odor with low evaporation |
Ingestion | This solution is acidic and is not drinkable |
Skin contact | No irritation |
Eye contact | redness |
The Importance of Descaling
Descale is a combination of magnesium and calcium salts that settle in the pipes of cooling and heating systems. The water used for heat exchange contains salts that precipitate due to temperature changes in cooling and heating systems.
ColdMitrehProducts of Abrizan Company
ColdMitrehProducts are designed for various applications:
No | Product name | Descriptions and applications |
1 | General sard mitreh | Strong scale remover with controlled corrosion |
2 | Cryogenic sard mitreh | Scale remover for cryogenic system |
3 | Thermal sard mitreh | Scale remover for thermal system |
4 | Mitreh 0356 | Corrosion products remover |
5 | Food grade sard mitreh | Food grade scale remover for food industries |
6 | Sard mitreh for condenser | Scale remover for condensers with controlled corrosion |
7 | Sard mitreh for wall mounted packages | Scale remover for wall mounted packages with controlled corrosion (20 liter gallon packaging) |
8 | Sard mitreh for wall mounted packages | Scale remover for wall mounted packages with controlled corrosion (one liter packaging) |
9 | Cryogenic sard mitreh for ships | Scale remover for ships cryogenic systems |
10 | Thermal industrial scale remover mitreh for ships | Scale remover for ships thermal systems |
First aid measures
Ingestion | Wash out mouth with water. Consult a doctor |
Inhalation | In case of direct inhalation; go to fresh air |
Skin contact
| In contact with skin, eliminates fat, and causes dryness. The position should be rinsed with cold water |
Eye contact
| Wash out with plenty of water while holding eyelids open. Consult a doctor so far, no complications have been observed even in worker who produced this solution |
The use of cold mitreh in boilers and heating systems prevents the reduction of system efficiency. Deposits in these systems prevent proper heat transfer and to compensate for it, more fuel is needed, which increases energy costs. Also, in cooling systems, deposits prevent proper heat and cooling transfer, which causes many problems, especially in the food industry.
For free consultation and to order different types of cold mitreh, please contact the sales department on the contact uspage
share :
Corrosion comparison: Mitreh Cold scale remover solution (MDA0102) vs. hydrochloric acid
1404/08/24What is the Langelier Index? A Complete Guide to Predicting Water Sedimentation and Corrosion
1404/08/21Measuring Carbonate and Bicarbonate in Water: A Complete Guide to Alkalinity Control
1404/08/19Warning signs that indicate the need for chemical cleaning of the heat exchanger
1404/08/17
Related Articles
Corrosion comparison: Mitreh Cold scale remover solution (MDA0102) vs. hydrochloric acid
Scientific comparison of corrosion of cold miter scale remover solution (MDA0102) with hydrochloric acid on C1010 steel and titanium. Results show that cold miter has up to 99.95% less corrosion and is a safer alternative for the oil, gas and petrochemical industries.
Determining energy savings and financial return to the employer using Mitreh solution
One of the most important points in a heat exchanger is the overall heat transfer coefficient. This coefficient is obtained in terms of the conduction and convection resistances between the fluids separated by flat walls and cylindrical shells, respectively. The layer of scale on the surfaces may increase the resistance to heat transfer between the two fluids to a large extent. This effect can be taken into account by introducing an additional thermal resistance, called the fouling coefficient (Rf), and its value depends on the operating temperature, fluid velocity, and the operating time of the exchanger.
The inhibition rate of industrial mitreh solution against corrosion of carbon steel and stainless steel in DM environment
The aim of this study was to determine the effectiveness of industrial mitreh solution in reducing the corrosion rate of commonly used metals exposed to industrial water environments. The results showed that using mitreh solution significantly reduces the corrosion of metals made of plain carbon steel and stainless steel in DM water.
Efficiency of cold mitreh solution in removing scale from open circuit cooling systems
The purpose of this study was to investigate the effectiveness of Mitreh MDA0102 scale remover solution in industrial water environments according to NACE standards in two environments: calcium carbonate and calcium sulfate, and to compare it with acid washing. According to this study, this solution is a non-corrosive solution, unlike the solutions used in acid washing, which greatly increase corrosion. Also, the results of couponing indicated that the presence of Mitreh vector sediment solution will prevent further corrosion by forming a thin layer on the heat transfer surface.
The anti-fouling and corrosion effect of mitreh in heating and cooling systems
One of the main factors of scale in building installations is the presence of calcium carbonate in water, because the solubility of this compound in water is very low and if the conditions are right, it will precipitate quickly. One of the parts that provides these conditions is the surfaces in contact with water in heat exchangers in domestic gas-fired boilers (heat packages).
Industrial Mitreh (sediment remover and anti-corrosion)
Any system where temperature and water are the main elements for its operation inevitably requires the invention of Abrizan Company, called Industrial Mitreh, because wherever there is temperature and water, the formation of sediment is inevitable, unless a substance is used that suspends these sediments. This is the main function of an excellent anti-sediment solution.
Comparison of mitreh solution with DM
In order to compare DM and mitreh solution, it should be kept in mind that three different substances should be used for sediment removal, sediment prevention, and corrosion prevention, and in this regard, usually materials such as acids for sediment removal, DM for sediment removal, and in some cases Materials are also used to remove oxygen from water.
Anti-fouling mitreh
It has been about a decade since a new anti-scale solution entered the market, an anti-scale that plays an important role in protecting all types of heating and cooling systems from the formation of scale. This specialized product is called Mitreh and is a new invention of the Abrizan Company.
Submit your opinion
Your email address will not be published.