acid washing

Scientific comparison of corrosion of cold miter scale remover solution (MDA0102) with hydrochloric acid on C1010 steel and titanium. Results show that cold miter has up to 99.95% less corrosion and is a safer alternative for the oil, gas and petrochemical industries.

The purpose of this study was to investigate the effectiveness of Mitreh MDA0102 scale remover solution in industrial water environments according to NACE standards in two environments: calcium carbonate and calcium sulfate, and to compare it with acid washing. According to this study, this solution is a non-corrosive solution, unlike the solutions used in acid washing, which greatly increase corrosion. Also, the results of couponing indicated that the presence of Mitreh vector sediment solution will prevent further corrosion by forming a thin layer on the heat transfer surface.

Steam boilers are mainly made of carbon steels, and the internal surface of these metals that are in contact with water must be free of deposits. Deposits have a lower thermal conductivity than metals, which causes the temperature of the metal to rise on the combustion wall side. Therefore, more fuel is needed to produce steam. Therefore, there is a need to control and wash these deposits inside the steam boiler.

In industries such as oil, gas and petrochemical, there is always an attempt to prevent the formation of deposits using different methods in equipment such as heat exchangers and boilers. In this field, a lot of money is spent on chemical materials and additives. But most industrial heat exchangers are exposed to sedimentation due to various reasons such as the low quality of water in different areas. These deposits are mostly formed in the pipes of the converters. In order to reduce the losses caused by sedimentation, the converter must be continuously monitored and cleaned.

Mitreh is a superior solution for dealing with scale in various industries. Mitreh scale removal solution, a revolutionary product from Abrizan Industrial Research Company, is an efficient alternative to traditional scale removal methods. This product offers a comprehensive solution to the scale problem in various industries by overcoming the limitations of existing physical and chemical methods.

One of the methods of producing fresh water for industrial use is the use of multi-stage thermal desalination plants to desalinate seawater. Due to the high content of soluble and insoluble compounds in seawater and the high temperature shock in desalination packages, sedimentation in these packages is unavoidable. For this reason, periodic sediment removal from desalination plants should be performed.